To optimise Chemical usage and Save Water and Power
Gross Weight: 350 Kg
Cooling Method: Water Cooling
Output Type: DC
Connect the controller to the 110 or 230V output of the Timer in parallel to the pump. This will prevent accidental feeding of chemicals when the pump is not running. Make sure to follow the electrical code.
Install the sensors on the recirculation line or on the optional bypass line. The three sensors can be mounted directly on the main recirculation line with 3" PVC tees, as shown on the schematic. For recirculation lines over 1-2" in diameter lines, the sensors should be mounted on a 1/2" bypass line.
Connect the chemical feeders to the 110 or 230V controller outputs, according to the manufacturer's instructions, making sure to inject the chemicals downstream of the sensors. For a bromine or chlorine erosion feeder, install a corrosion-resistant solenoid valve on the intake line of the feed