Reverse Osmosis Plants

ABS Reverse osmosis 500 LPH plant removes total Suspended solids ,Total Dissolved solids and bacteria From Raw bore well water.

ABS RO 500LPH plug and play type plant and customer need to give the inlet line, Incoming Electrical connection to plant and taken outlet from Ro plant, rest of the things inbuilt this plant.

ABS RO 500LPH plant consist of Feed Pump, Pressure sand Filter, Activated carbon Filter ,Micron Filters, High Pressure pump and Ro Membrane system. Set of instruments given to monitor Flow rate and pressure.

All the arrangements fixed in SS skid

• Feed Pump: 1 number
• Pressure Sand Filter: 1 set
• Activated Carbon Filter: 1 set
• Micron Filter: 2 number
• Dosing Pump: 1 number
• High Pressure Pump: 1 number
• Ro Module: 2 number
• RO Membrane: 2 number
• SS Skid: 1 number
• Interconnecting Pipe lines : 1 lot
• Flow meter: 2 number
• Pressure Gauge: 5 number
• Pressure Switch: 1 number
• Panel board: 1 number
• Water Level controller: 1 number

All the arrangements fixed in SS skid

• Feed Pump: 1 number
• Pressure Sand Filter: 1 set
• Activated Carbon Filter: 1 set
• Micron Filter: 2 number
• Dosing Pump: 1 number
• High Pressure Pump: 1 number
• Ro Module: 2 number
• RO Membrane: 2 number
• SS Skid: 1 number
• Interconnecting Pipe lines : 1 lot
• Flow meter: 2 number
• Pressure Gauge: 5 number
• Pressure Switch: 1 number
• Panel board: 1 number
• Water Level controller: 1 number

All the arrangements fixed in SS skid

• Feed Pump: 1 number
• Pressure Sand Filter: 1 set
• Activated Carbon Filter: 1 set
• Micron Filter: 2 number
• Dosing Pump: 1 number
• High Pressure Pump: 1 number
• Ro Module: 2 number
• RO Membrane: 2 number
• SS Skid: 1 number
• Interconnecting Pipe lines : 1 lot
• Flow meter: 2 number
• Pressure Gauge: 5 number
• Pressure Switch: 1 number
• Panel board: 1 number
• Water Level controller: 1 number

ABS RO Plant is capable of removing up to 99%+ of the dissolved salts (ions), particles, colloids, organics, bacteria and pyrogens from the feed water (although an RO system should not be relied upon to remove 100% of bacteria and viruses). An RO membrane rejects contaminants based on their size and charge. Any contaminant that has a molecular weight greater than 200 is likely rejected by a properly running RO system (for comparison a water molecule has a MW of 18). Likewise, the greater the ionic charge of the contaminant, the more likely it will be unable to pass through the RO membrane. For example, a sodium ion has only one charge (monovalent) and is not rejected by the RO membrane as well as calcium for example, which has two charges. Likewise, this is why an RO system does not remove gases such as CO2 very well because they are not highly ionized (charged) while in solution and have a very low molecular weight. Because an RO system does not remove gases, the permeate water can have a slightly lower than normal pH level depending on CO2 levels in the feed water as the CO2 is converted to carbonic acid.

Reverse Osmosis is very effective in treating brackish, surface and ground water for both large and small flows applications. Some examples of industries that use RO water include pharmaceutical, boiler feed water, food and beverage, metal finishing and semiconductor manufacturing to name a few.

RO 250 LPH Plant can use at:

• All type Industrials for Drinking ,Process and Utility Purpose.
• Commercial complex
• Apartments
• House hold
• Institution
• Parks
• Railway /Bus Stations
• Hospitals for provide Safe drinking water to all.

All the arrangements fixed in SS skid

• Feed Pump: 1 number
• Pressure Sand Filter: 1 set
• Activated Carbon Filter: 1 set
• Micron Filter: 2 number
• Dosing Pump: 1 number
• High Pressure Pump: 1 number
• Ro Module: 2 number
• RO Membrane: 2 number
• SS Skid: 1 number
• Interconnecting Pipe lines : 1 lot
• Flow meter: 2 number
• Pressure Gauge: 5 number
• Pressure Switch: 1 number
• Panel board: 1 number
• Water Level controller: 1 number